RP 5 T – RP 12 E or AF – RP 30 D – RP 50 B

RP 5 T – RP 12 E – RP 30 D – RP 50 B

AUTOMATIC C-Frame Flexural Testing Machine Load 5 kN – 12 kN – 30 kN – 50 kN

This ergonomic C-Frame combines a sturdy and high quality design. After welding, our C-Frames are then milled to the jack locking plates fixings and the test table in order to correct any misalignment due to welding !

 

 

Furthermore, all our flexural testing frames are quipped with double actin jacks allowing the automatic return of the jack at the end of the test.

         

 

Standards : EN 15037-2, EN 1340, EN 1339, EN 490, EN 15435

Ergonomics:

Set uniformely on a very rigid table, our C-Frames affers, besides an expectionnal accessiblity to the testing sample, a very good working ergnonmy, even allowing to set the specimens without any risk of back pain !

Also, the working table has openwork legs allowing easy and safe handling with a simple pallet jack.

  

Specifications:

  • Weleded C-Frame
  • Long stroke double acting jack (see chart), working at 400 bar
  • Hydraulic stroke : 300 mm (or 350 mm)
  • Jack mounted on low friction seals and Teflon guiding
  • Automatic return of the jack at the end of the test
  • Specific blades and accessories for roof tiles, infillor blocks, kerbs, slabs, and so on
 

RP 5 T

 Roof tiles

RP 12 E

 Infiller blocks

RP 30 D

Slabs

RP 50 B

Kerbs
Maximum Load        (in kN) 6 12 30 50
 Tooling                    (in mm)    Ø 40 x 600      Ø 20 x 300      Ø 40 x 650      Ø 40 x 600   
Height Chamber      (in mm) 240 240 240 240
 Stroke                      (in mm) 300 300 350 350
 Weight                      (in kg)   250 300 420 500
Standards                            EN 490 EN 15037-2 EN 1339 EN 1340

 

   Kerbs